Section 1: Petrol + Chemical Hoses

We Provide:

The entire assembly of hoses.

A proper hose assembly must meet three requirements: the components must be suitable and of high quality, compatible with one another, and professionally assembled.

This has been our “core expertise” for decades. We make sure that the hose and coupler that our customers receive are appropriate for both self-assembly and ready-to-use hose assemblies.

We handle the remainder after consultation or as per your instructions. Cutting the hose to the proper length, putting the hose tail and clamps together, installing the attachments, testing (if necessary, an electrical conductivity and pressure test), extra marking, quality assurance, and issuing test certificates.

Section 2: Hose Fittings

You may rely on the high-quality hose fittings we produce. Standards-compliant, most suited for use with our hoses, and, if necessary, professionally mounted on your hose.

Our primary area of expertise is fittings for chemical and petroleum-based products. These fittings are mostly used in industrial plants, rail and road tankers, refueling and transfer operations, and gas stations.

Our hose connectors will provide you with the following:

• excellent recommendations from our sales departments
• fantastic value for the money
• There are numerous goods in stock.
• Safe hose assembly is made possible by the principle of safety by design.
• permanent connection with a seal
• exceptional operational safety
• long-lasting brand quality
• ergonomically sound and useful design
• created to comply with official norms

Section 3: Tank + Pipe Fittings

Components for tank, pipe, and hose coupling.

You can discover couplings and accessories in the second section of the catalogue. They can be mounted to tank systems, road or rail tankers, hose assemblies, pipe networks, and pipes. In addition, we provide a wide selection of adapters, caps, plugs, swivels, welding flanges, sight glasses, and spare seals. Only components of the highest caliber, the majority of which are from our own production, will be provided.

The typical programme you see in the catalogue is only a portion of what we provide. As long as it is within our area of expertise, we will provide any additional coupling that is required, whether it is widely available or has a unique design.

Tight quality standards are followed throughout the production of couplings.

greater than necessary wall thickness for wear resistance and longer service life

measurements that are accurate to gauge and have been verified using precise measuring tools for durability. Hot stamped brass connectors are used (heavy forging dies, maximum stability against cracking). Investment-cast stainless steel connectors with a smooth, electro-polished surface and no shrink holes.

Materials meet the requirements outlined in the standard (something that unfortunately cannot be taken for granted any more with many manufacturers) thorough preparation of the raw materials; premium replacement parts, such as springs, bolts, and sealings.

Section 4: Rubber Expansion Joints

Solutions Providers for Pipe Systems:

Large axial, lateral, and angular ranges of permissible motion, little response force, and little inherent resistance are what set ERVs apart. ERVs are used to equalise structural settling, such as basement subsidence or earth movements, and to absorb tensions brought on by temperature variations (thermal expansion). ERV can be used as a pipe insert or expansion component to make inspections easier.

ERV are superb vibration dampeners and perfect noise dampeners. The majority of fluid-generated low-frequency noise and structure-borne noise from pipework is eliminated. Additionally, ERV are used to correct for manufacturing errors. There will be less issues during installation brought on by inaccuracy if ERV are taken into consideration throughout the planning stage.

Section 5: Nozzles + Spare Parts

Solutions Providers for Pipe Systems:

Large axial, lateral, and angular ranges of permissible motion, little response force, and little inherent resistance are what set ERVs apart. ERVs are used to equalise structural settling, such as basement subsidence or earth movements, and to absorb tensions brought on by temperature variations (thermal expansion).

ERV can be used as a pipe insert or expansion component to make inspections easier. ERV are superb vibration dampeners and perfect noise dampeners. The majority of fluid-generated low-frequency noise and structure-borne noise from pipework is eliminated. Additionally, ERV are used to correct for manufacturing errors. There will be less issues during installation brought on by inaccuracy if ERV are taken into consideration throughout the planning stage.

You can find the following forecourt nozzles and components in catalogue section 5 in addition to our two most significant nozzles, ZVA Slimline 2 and ZVA Slimline 2 GR:

• Assembly for COAX hoses for active vapour recovery
• Product Badges EK 145 (for a quick selection, try our new BadgeSelector tool)
• HiFlo for truck refuelling, ZVA 25,
• ZVA Slimline AdBlue for urea solution filling in trucks (DEF, ARLA 32, AUS 32)
• Autogas LPG ZVG and GasGuard nozzles

Hose Reels – Custom-Made

With the addition of hose reels, we have expanded our product line.

Our Hose Reels are delivered as a complete set with our hoses, couplings, or nozzles.

These containers are frequently used for stationary or mobile refuelling, terminals, and road tankers. They are made in accordance with CE laws, fulfil European health, safety, and environmental standards, and are produced to the well-known high Elaflex quality level.

Advantages

• high quality standard, longevity
• many options, modular designed to suit your space, media and requirements
• delivery as complete, tested, system including hoses, couplings and nozzles
• economical pricing
• short lead times

Dispensing High-Pressure Gas

Taking on the Gas Energy Market Challenge

The energy industry of today has challenging circumstances for handling, processing, and transporting liquid or flammable gases. The hazards associated with fuel storage and dispensing with high-pressure gases like CNG and other technical gases are minimised by our refuelling equipment. Efficiency, safety, and cost-effectiveness are ensured in various processes by the particular equipment properties and the way that it is used.

Our daughter firm, Oasis Engineering, produces our sturdy CNG components in New Zealand. Oasis is a globally active expert in valves and couplings used in the gas energy and transport sectors, offering solutions to manage bigger volumes, higher pressures, and demanding reliability standards.

The dependable and tried-and-true machinery is appropriate for technical gases like:

• CNG (Compressed Natural Gas)
• Biogas
• Air
• Nitrogen
• Helium

Benefits

• Turnkey solutions
• highest flow rates
• Meet rigid safety requirements
• Operate within strict hygiene criteria
• Durable and easy servicing